Shop Rhinestone Supply

#1 Rhinestone & Component Supplier

CG 500 2 Part Epoxy Glue - 100ml

  Enlarge  

CG 500 2 Part Epoxy Glue - 100ml

CG 500-35 (A+B) Two Component Epoxy Resin Glue.
100ml (2 x 50ml Tubes).

FINAL SALE

To extend the life of this glue by up to 1 year, we recommend storing in your refrigerator when not using.  

High performance gluing system for both foiled and unfoiled rhinestones (mainly Round Stones, Non-Hotfix Flat Backs and Fancy Stones), within the jewellery segment and other industries such as accessories, interior, electronics, etc.

Curing and final strength are dependent on temperature. Curing can be accelerated by application of heat (to a max of 100°C).

Mixture ratio of components A + B by volume: 1:1
Pot life at room temperature, quantity applied 1g (23°C / 73.4°F): 15 mins
Complete curing time at room temperature: 24 hours
Time to handle at room temperature: 3 hours

Complete curing time in oven (40°C / 104°F): 12 hours
Complete curing time in oven (80°C / 176°F): 2 hours
Complete curing time in oven (100°C / 212°F): 1 hour

The exact mixing of the two component glue is especially important! Care must be taken to follow the instructions:
1). Mix both of the glue components by volume at a ratio of 1:1
2). Mix the two components well for at least one minute
3). Put the mixed glue into a dispenser

High grade ingredients
CG 500-35 contains only high grade ingredients. It offers significant advantages for transportation purposes (e.g. air freight shipping) because it is not classified as hazardous material according to IATA transport regulations.

Ideal mechanical and chemical resistances
CG 500-35 is highly resistant against mechanical stress (e.g. hits and deformations), humidity, perspiration, salt and chlorine water and UV light. 

Multiple fields of application

Price: $41.99
Quantity: