1. Platinum Bond 7800 is specially formulated to meet the strictest industrial requirement. Use PB-7800 for excellent adhesion to wood, metal, glass, ceramics, leather, fiberglass, rubber and hard plastics.
2. For best results, test small area before use.
3. Use at room temperature.
4. Make sure surfaces are clean and dry.
5. Roughen surfaces to be bonded.
6. Apply PB-7800 to both surfaces and press together.
7. Let bond set 2-6 hours before handling. Bond is full-strength after 24-72 hours.

Tips & Techniques

For maximum-strength bond, let adhesive set for 5 minutes before joining surfaces.

Caution: Contains tetrachloroethylene. Deliberate misuse may be harmful. Warning: This product contains a chemical known to the State of California to cause cancer. Harmful if inhaled or swallowed. May cause dizziness, headache or nausea. Can cause skin and eye irritation. Exposure may cause damage to the kidneys or liver. Keep away from heat and flame. Contact with flame or hot surface may produce toxic gases. Use only with adequate ventilation. To avoid breathing vapor, open all windows and doors to assure fresh air movement during application and drying. When using, do not eat, drink or smoke. Avoid prolonged or repeated contact with skin. Wash hands thoroughly after handling. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty persists, get medical assistance immediately. If swallowed, do not induce vomiting, seek medical attention. In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes. For further health information, contact your local poison control center. KEEP OUT OF REACH OF CHILDREN.